19 - ENGLISH
We suggest using the following sanitizing
solution:
Ecolab P3 Topax-san
(4% dilution = 200 ml every 5 litres of water).
•
Pour the maximum admitted load of cold drinking
water into the machine to rinse the surfaces which
were just treated with the sanitizer.
•
Drain the rinse water and turn the machine off.
•
When pre-washing is over, all the removable parts in
contact with the product must be disassembled and
sanitized in a separate tub.
SANITIZING REMOVABLE PARTS
PREPARATION OF WASHING TUB
•
Wash your hands well and/or wear disposable
gloves.
•
Fill a clean tub with a sufficient amount of drinking
water at approximately 50°C.
•
Prepare the supplied brush and the OR disassembly
device and place them in the solution.
REMOVING AND CLEANING COVER
•
Slide the hinge pins out and remove the lid.
•
Emerge the previously disassembled components
into the tub with the sanitizer and brush the surfaces
with care. Pay special attention to the surfaces in
direct contact with the product.
Summary of Contents for TAYLOR C151
