5
Air Conditioner Features
Using Air Conditioner
To begin operating the air conditioner, follow these steps:
1. Set the temperature selector to the highest number (coldest or cooler setting).
2. Set the mode control to the highest COOL setting.
3. Adjust the louvers for comfortable air flow (see Air Directional Louvers).
4. Once the room has cooled, adjust the temperature selector to the setting you find most
Review the “Air Conditioner Features” section for other settings.
NOTE:
If the air conditioner is turned off,
wait 3 minutes before restarting. This allows
pressure inside the compressor and
equalize. Failure to follow these instructions
may be harmful to your unit.
The controls featured in this manual are representative of many available models. Your model
may offer slightly different features.
Please always wait 3 minutes when t
u
rning unit off then on again, and when changing from cool to fan &
back to cool. This prevents compressor from overheating & possible circuit breaker tripping.
SZ000710(En)-JiXie
2005.9.13, 11:04 AM
5
Cool Mode
The desired cool setting is selected by rotating the
MODE
knob to the right to the appropriate
“
high cool
” has maximum cooling effect and airflow.
“
low cool
” has minimum cooling effect and airflow.
Note: If your unit is equipped with a vent handle, keep it closed for maximum efficiency.
Fan Mode
Rotate the
MODE
knob to the left to select your choice of fan speeds for air circulation.
Note: When selecting a fan speed, the compressor will not run.
Temperature Selector
This is used to set the desired room temperature when the unit is being operated
in the
“COOL MODE”
.
To set the desired room temperature, rotate the selector switch to the desired setting. After
the set temperature is achieved the thermostat will automatically start and stop the compressor
in order to maintain the desired set temperature.
Rotate the temperature selector clockwise for higher cool settings. Higher cool settings will
provide lower room temperature.
Rotate the temperature selector counter clockwise for lower cool settings. Lower cool settings
will provide higher room temperature.
(2-WAY)
AUGER WHEEL
Air Directional Louvers
Air directional louvers control air flow direction. Your air conditioner has the louver type
described below.
Auger Type
Rotate the Auger Wheels until the desired Left/Right direction is obtained.
comfortable.
location.
MODE
MODE
TEMPERATURE SELECTOR
TEMPERATURE SELECTOR
m
m x
x
cool
cool
min
cool
min
cool
7
7
1
1
2
2
3
3
4
4
5
5
6
6
high
cool
high
cool
low
cool
low
cool
low
low
ff n
n
h
hiig
gh
h
ff n
n
a
a
a
a
a
a
OFF
OFF
