13
When the oven is first plugged in, the display will flash “:0” and a tone will sound. If the AC power ever goes
off, the display will flash “:0” when the power comes back on.
DO THIS...
1. Touch TIME pad.
THIS HAPPENS...
This is a 12 hour clock system.
If you touch TIME pad once
more, the display will show 24H.
CONTROLS (MFM-7DTP)
SETTING THE CLOCK
NOTE: If you attempt to enter an incorrect time, the time will not be set and a error signal tone will
sound. Touch the TIME pad and re-enter the time.
TIME
2. Enter the correct time of day
by touching the numbers in
sequence.
4. Touch TIME pad.
The colon starts blinking.
If you selected 12 hour clock system, this digital clock allows you to set from 1:00
to 12:59.
If you selected 24 hour clock system, this digital clock allows you to set from 0:00
to 23:59.
If the clock (or display) shows any abnormality, unplug the oven from the AC
outlet. Plug it in again and then reset the clock.
TIME
AM PM No Oz Alarm On
Defrost Cook Cook
(Low) (Med) (High) Lock Time
AM PM No Oz Alarm On
Defrost Cook Cook
(Low) (Med) (High) Lock Time
3. Touch AM/PM pad.
Touch AM/PM to change desired
indicator.
1
2
3
0
AM PM No Oz Alarm On
Defrost Cook Cook
(Low) (Med) (High) Lock Time
NOTE:
If you select 24H system,
AM/PM bar segment will
be off.
TIME
Summary of Contents for MFM-6D
