background image

27

STORING FOOD AND SAVING ENERGY

Ideas for storing foods

Fresh food storage

•  Keep the fresh food compartment 

between 34°F and 44°F with an 

optimum temperature of 37°F.

•  Avoid overcrowding the refrigerator 

shelves, which reduces air circulation 

and causes uneven cooling.

•  Avoid placing food in front of air ports. 

(See 

CONTROLS AND SETTINGS

 for 

illustration.)

Fruits and vegetables

•  Store fruits and vegetables in crisper 

drawers, where trapped moisture 

helps preserve food quality for longer 

time periods.

•  Do not wash items until ready to use. 

Remove excess water before placing 

inside unit.

•  Wrap any items that have strong 

odors or high moisture content.

Meat

•  Wrap raw meat and poultry separately 

and securely to prevent leaks and 

contamination of other foods or surfaces.

•  Use the Custom-Flex

TM

 Temp Drawer 

to store meat/poultry for short-term 

storage. Any meat to be kept longer 

than two days should be frozen.

Frozen food storage

•  Keep the freezer compartment at 0°F 

(-18°C) or lower.

•  A freezer operates most efficiently 

when it is at least 

 full.

Packaging foods for freezing

•  To minimize food dehydration and quality 

deterioration, use aluminum foil, freezer 

wrap, freezer bags, or airtight containers. 

Force as much air out of the packages as 

possible and seal them tightly. Trapped air 

can cause food to dry out, change color, 

and develop an off-flavor (freezer burn).

•  Wrap fresh meats and poultry with 

suitable freezer wrap prior to freezing.

•  Do not refreeze meat that has 

completely thawed.

Loading the freezer

•  Prior to grocery shopping, activate 

Freeze Boost

 so newly purchased 

food designated for the freezer will 

be preserved as quickly as possible.

•  Activating 

Freeze Boost

 also will 

help the freezer more efficiently 

maintain the selected temperature 

after placing new purchases with 

pre-existing frozen foods.

•  Avoid adding too much warm food 

to the freezer at one time. This 

overloads the freezer, slows the 

rate of freezing, and can raise the 

temperature of frozen foods.

•  Leave a space between packages, so 

cold air can circulate freely, allowing 

food to freeze as quickly as possible.

Ideas for saving energy

Installation

•  Locate the refrigerator in the coolest 

part of the room, out of direct 

sunlight, and away from heating 

ducts or registers.

•  Do not place the refrigerator next to 

heat-producing appliances such as a 

range, oven, or dishwasher. If this is 

not possible, a section of cabinetry or 

an added layer of insulation between 

the two appliances will help the 

refrigerator operate more efficiently.

•  Level the refrigerator so that the 

doors close tightly.

Temperature settings

•  Refer to 

CONTROLS AND  

SETTINGS

 for illustration and 

recommended settings.

Food storage

•  Avoid overcrowding the refrigerator 

or blocking cold air vents. Doing so 

causes the refrigerator to run longer 

and use more energy.

•  Cover foods and wipe containers 

dry before placing them in the 

refrigerator. This cuts down on 

moisture build-up inside the unit.

•  Organize the refrigerator to reduce 

door openings. Remove as many 

items as needed at one time and 

close the door as soon as possible.

•  Do not place a hot container directly 

on a cold shelf. Remember, such an 

extreme temperature change may 

damage the glass.

Summary of Contents for GRMC2273CF









































Reviews: