INSTALLING THE TRIM FRAME
Place the trim frame over the microwave oven.
Make sure the trim frame is level and the microwave
oven is centered within the trim frame. Mark four
center positions through the four mounting holes
of the trim frame.
NOTE:
Center the trim frame equally on all four
sides.
Remove the trim frame and drill four pilot holes.
Attach the trim frame by using four screws.
D
C
B
A
6
.
4
Installation Instructions
Pilot Hole
Cutout Opening
Mounting Hole
Trim Frame
1
″
Screw
INSTALL MICROWAVE OVEN
INTO CABINET
Slide the microwave oven part way into the cabinet
opening.
Plug in the microwave oven.
Bottom bracket must be flat to the cutout floor to
engage correctly with the anti-tip bracket as shown.
Carefully slide the microwave back, making sure the
power cord is not mashed or cut.
Center
the microwave oven within the cutout
opening and slide the microwave oven in place,
engaging the anti-tip bracket.
Ensure the microwave oven is
accurately centered
.
Drill pilot holes through the positioning flange and
then install three
1
⁄
2
″
screws at the front of the
bottom duct as shown.
F
E
D
C
B
A
5
.
Anti-Tip Assembly
Bottom Duct
1
⁄
2
″
Screw
Bottom Bracket
Anti-Tip
Bracket
Cutout Opening
Positioning Flange
1
⁄
2
″
Screw
REPLACE ANY LOOSE ITEMS
Your trim kit is now fully installed. Replace any
loose items that were removed from the inside of
the microwave oven.
Keep these installation instructions for future
reference.
Replace house fuse or close circuit breaker.
C
B
A
7
.
