Oven Control Functions
9
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with
the various pad functions of the oven as described below.
BROIL PAD— Used to
select the variable broil
function.
UP and DOWN ARROW PADS— Used along
with the function pads to select oven
temperature, cook time, start time (when
programming an automatic start time), time of
day, clean time and minute timer.
BAKE PAD—Used
to select the bake
function.
START TIME
PAD— Used to set
the desired start
time for baking &
Self-Clean. May be
used with BAKE
TIME to program a
delayed bake cycle.
BAKE TIME
PAD— Used to
enter the length of
the baking time.
SELF-CLEAN PAD—
Used to select a longer
3 hour Self-Clean
cycle time.
OVEN, PREHEAT & DOOR LOCKED LIGHTS* — The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT" light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the Self-
Clean cycle or the oven door lockout is activated.
FEATURE INDICATOR
LIGHTS— These light to
show which feature is in
use.
CLOCK
PAD— Used
to set the
time of day.
CLEAR/OFF PAD— Used
to clear any function
previously entered
except the time of day
and minute timer. Press
CLEAR/OFF to stop
cooking. Also the CLEAR/
OFF pad is used to
activate oven lockout
setting.
TIMER ON/OFF PAD—
Used to set or cancel the
minute timer. The minute
timer does not start or stop
cooking. Also,
TIMER ON/OFF pad is used
to set the Continuous Bake
feature.
*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during
preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the
preheat indicator light turns OFF, your oven is ready.
SPEED CLEAN
(SELF-CLEAN) —
Used to select a
shorter 2 hour Self-
Clean cycle time.
OVEN LIGHT PAD—
Used to turn the interior
oven light ON or OFF.
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for
silent operation. Press and hold
. After 7 seconds, the control will beep once. This will block the controls from sounding
when a pad is pressed. To return the sound, press and hold
again for 7 seconds until the control beeps once.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1.
Press
. "— —" appears in the display.
2.
Press and hold the
until "HI" appears in the display.
3.
Press and hold
until °F or °C appears in the display.
4.
Press the
or
to change °F to °C or °C to °F.
5.
Press any control pad to return to normal operating mode.
8
