Frost precautions
If the appliance is installed in an area
where the temperature can be less than 0
°C, remove the remaining water from the
inlet hose and the drain pump.
Do this procedure also when you want
to do the emergency drain.
1. Disconnect the mains plug from the
mains socket.
2. Remove the water inlet hose.
3. Remove the drain hose from the rear
support and unhook it from sink or
spigot.
4. Put the ends of the drain and inlet hose
in a container. Let the water flow out of
the hoses.
5. Set any selected programme with
option spin/drain and let it operate until
the end of the cycle.
6. When no more water flows, install the
inlet hose and the drain hose again.
7. Press the on/off button to deactivate the
appliance.
WARNING!
Make sure that the temperature is
more than 0°C before you use the
appliance again. The manufacturer is
not responsible for damages caused
by low temperatures.
25
CARE AND CLEANING
