Malfunction display and solutions
When the washer is in trouble, please contact local service office or the sales
service department of our company and the customer should not dismantle the
machine without permission.
If the washer can not work normally, and the abnormal indication is shown in the
display tube window or the machine alarms, please check and correct as
follows.
Abnormal display and alarm of the washer
When the washer is in trouble, please contact local service office or the sales
service department of our company and the customer should not dismantle the
machine without permission.
If the washer can not work normally, and the abnormal indication is shown in the
display window or the machine alarms, please check and correct as follows.
34
33
Alarm of water intaking or
making up over 1 hour.
The lid is not close before
spin.
Alarm for water level sensor.
Child lock light flashes.
*Flickering simultaneously.
On
Off
Alarm for shocking in the
same spin process third
times.
Electronic door lock
malfunction.
DrainageTime
≥
6min
Water
Level
switch
is
not
reset
.
Check the water tap is
opened or not.
Closed the door.
Replace Water Level sensor.
Communication failure.
Please keep the clothes
balance.
Check door lock.
Check the water level sensor
and the drain pump
DISPLAY*
CAUSE
SOLUTION
Alarm of water intaking or
making up over 1 hour.
Drainage Time
≥
6min
Water
Level
switch
is
not
reset
.
The lid is not close before spin.
Alarm for shocking in the same
spin process third times.
Alarm for water level sensor.
When the communication failure.
Door lock malfunction.
E1
E2
E3
E4
F8
C9
Fd
Check the water tap is
opened or not.
Check the water level sensor
and drain pump.
Closed the door.
Please keep the clothes
balance.
Replace Water Level sensor.
Re-allocation of the
communication terminal plug.
Check door lock.
DISPLAY
CAUSES
METHODS
ENG
ENG
