Frigidaire FTH61200C, User Manual

Page: 6 / 12

INSTALLATION
The cooker hood is supplied with :
3 Spacer (F, H)
4 Screws C
2 Bulbs
To fixing the Hood, use the 4 Screws (C) 6mm supplied with the hood.
Close the space that remains between the hood and the wall, adjusting the
spacer (F).
Before completing any connection, make sure the house voltage
corresponds with the voltage indicate on the data label.
Connecting the hood to the grid
Warning: before connecting the hood: switch off the electricity supply
and check that the supplied voltage and frequency coincide with that
indicated on the appliance nameplate.
If the extractor hood has a plug, connect it to a power socket in line with
applicable regulations, located in an accessible area.
If the hood does not have a plug, connect it directly to the electrical grid
protected by a separator device accessible for disconnection, in line with
local regulations.
The connection to the electrical mains must be made as follows:
BLUE………………………..”N” NEUTRAL
BROWN……………………..”L” LIVE
GREEN AND YELLOW…….(simbolo tierra) EARTH
If the terminals of the plug are unmarked or if you are in any doubt, consult a
qualified electrician.
If it is not supplied fit a a plug normalized in the cord for the load showed on
the rating plate.
EN