For Children
Avoid accidents. After unpacking the refrigerator,
keep packaging materials out of reach, especially
from children. Do not allow children to handle the
refrigerator, even when it is disconnected.
For the User / Installer
Disconnect the refrigerator before cleaning or
doing maintenance.
Do not leave the refrigerator unused for long
periods of time. If this becomes necessary, clean it,
open the doors, and leave them open. We
recommend that the refrigerator be turned on
several times during the period it is not in normal
use. Do not install the refrigerator outside.
The following items should not be place on top of
the refrigerator: heavy and unstable objects, and
heat-producing devices like regulators.
Wait at least 5 minutes after unplugging the
refrigerator before plugging it in again to protect the
compressor from excessive pressure.
Never unplug the refrigerator by pulling on the
power cord. Use the plug.
Do not compress, fold or tie up the power cord. Do
not change your refrigerator's plug. If the cord
becomes damaged, it must be replaced by a
service technician indicated by the manufacturer or
distributor.
Do not store medication, toxic or chemical products
in the refrigerator, as they may contaminate the
food.
Flammable aerosols and combustible products
(gas for lighters, banana oil, alcohol, gasoline,
propane, etc.) or products that bear a small flame
symbol should not be stored in refrigerators or
freezers, nor come close to the refrigerator, as they
may cause explosions.
Never lean on the refrigerator door, as this may
cause the hinges to become misaligned, allowing
Safety
04
19
Warmth Near the Doors
It is normal for the area near the door and sides to
present higher temperatures. The warmth
prevents moisture formation.
Warmth Near the Back
It is normal for this area to present higher
temperatures, since this is where the cooling fluid
circulates at higher temperatures. Avoid contact
with this part of the refrigerator.
Normal Operation
01.
It takes a few minutes for the freezer and refrigerator compartments to cool
when the unit is turned on: If the temperature of one of the compartments is
higher, when the unit is turned on, it will take a few moments for it to drop.
02.
The compressor surface is heating up: It is normal for the compressor surface
to heat up when it is operating properly. You should not touch it.
