background image

5

Fresh Food Storage

Cantilever Shelf

Shelf Adjustment

Refrigerator shelves are easily adjusted to suit individual needs.
Some models have 

sliding shelves

, others have 

cantilever

shelves

. Before adjusting shelves, remove all food. The shipping

clips that stabilize the shelves for shipping may be removed and
discarded.
To adjust

 cantilever shelves 

(shelves supported at the rear of the

refrigerator), lift the back of the shelf up and out. Replace shelf
by inserting hooks at rear into slots. Lower and lock into position.

SpillSafe

TM 

glass shelves (some models) catch and hold accidental

spills. In some models, the 

SpillSafe

TM

 shelves slide out for easy

access to food and fast cleaning. The shelves slide out
independently of the cantilever brackets. Just pull front of shelf
forward. Shelf can be extended as far as stopper will allow.

Door Storage

Door bins and shelves provide convenient storage of jars, bottles, and cans. Items
used often are available for quick selection.

The door bins can be moved to suit individual needs. Remove bins by lifting straight
up. Place bins in the desired position and lower over the supports.

The Dairy Compartment(s) is warmer than the general food storage section and is
intended for short term storage of cheese, spreads, or butter.

Tall Bottle Retainer 

(some models)

The Tall Bottle Retainer keeps tall containers in the bin from falling forward when
opening or closing the refrigerator door. To install, hold the retainer at the top, and
slide it over the outside wall of the bin, as shown. Note that the retainer works best
with the use of a bin snugger.

Micro-Serve Dishes  

(some models)

Food can be stored, cooked

*

, and served in Micro-Serve Dishes provided in some

models. These dishes slide easily into their own tray, which hangs below a door gallon
bin as shown below, conveniently freeing shelf space for other items.  

Note:

  Do not

hang tray below the bin in front of the ice maker.

*

  Remove plastic lid before cooking. Lid is intended for storage only.

Crispers

The Crispers, located under the bottom refrigerator shelf, are designed for storing
fruits, vegetables, and other fresh produce. Wash items in clear water and remove
excess water before placing in the Crispers. Items with strong odors or high moisture
should be wrapped before storing.

The Humidity Controls allow you to adjust the humidity within the Crisper. This can
extend the life of fresh vegetables which keep best in high humidity. Leafy
vegetables, however, keep best when stored with the Humidity Control set on high
moisture, or in a drawer without a Humidity Control. This keeps incoming air to a
minimum and maintains maximum moisture content.

Humidity Control

FRESH FRUITS

& VEGETABLES

LOWER

FRUITS

HIGHER

HUMIDITY

CONTROL

VEGETABL

ES

    Micro-Serve Dishes

Bin Snugger

Micro-Serve Dish Tray

Tall Bottle Retainer

WINE RACK

 

(

some models

)

The Wine Rack stores bottles of wine, or 2-liter plastic bottles of juice or
soda pop. To install, slide the wine rack onto the shelf with the curve facing
in. To remove, slide the wine rack out.

Wine Rack

Summary of Contents for FRT22RRHW3



















Reviews: