manualshive.com logo in svg

Frigidaire FRT21QRJZ3, User Manual

Share
Download
Frigidaire FRT21QRJZ3 User Manual Download Page 14

14

Before calling for service, review this list. It may save you both time and expense.
This list includes common occurrences that are not the result of defective workman-
ship or materials in this appliance.

Avoid Service Checklist

RUNNING OF REFRIGERATOR

OCCURRENCE

Refrigerator compressor does not run.

Refrigerator control is off. Set refrigerator control. See 

Setting the Controls.

Refrigerator is in defrost cycle. This is normal for a fully automatic defrosting refrigerator. The defrost
cycle occurs periodically, lasting about 20 minutes.

Plug at wall outlet is disconnected. Make sure plug is tightly pushed into outlet.

House fuse has blown or circuit breaker has tripped. Check and/or replace fuse with a 15 amp time-delay
fuse. Reset circuit breaker.

Power outage. Check house lights. Call local electric company.

Room or outside weather is hot. It is normal for the refrigerator to work longer under these conditions.

Refrigerator has recently been disconnected for a period of time. It takes about 8-12 hours for the
refrigerator to cool down completely.

Automatic ice maker is operating (some models). Operation of the ice maker causes the refrigerator to
run slightly more.

Doors are opened too frequently or too long. Warm air entering the refrigerator causes it to run more.
Open the doors less often.

Refrigerator or freezer door may be slightly open. Make sure refrigerator is level. Keep food and
containers from blocking door. See Occurrence section 

OPENING

/

CLOSING

 

OF

 

DOORS

/

DRAWERS

.

Refrigerator control (found in refrigerator section) is set too cold. Set the refrigerator control to a warmer
setting until the refrigerator temperature is satisfactory. Allow 24 hours for the temperature to stabilize.
Then, if the freezer temperature is not right, set the freezer control to a colder setting.

Refrigerator or freezer gasket is dirty, worn, cracked, or poorly fitted. Clean or change gasket. Leaks
in door seal will cause refrigerator to run longer in order to maintain desired temperatures.

Thermostat is keeping the refrigerator at a constant temperature. This is normal. Refrigerator goes on
and off to keep temperature constant.

Freezer control is set too cold. Set the freezer control to a warmer setting until the freezer temperature
is satisfactory. Allow 24 hours for the temperature to stabilize.

Refrigerator control is set too cold. Set the refrigerator control to a warmer setting. Allow 24 hours for
temperatures to stabilize. Then, if the freezer temperature is not right, set the freezer control to a colder
setting.

Refrigerator control is set too cold. See above solution.

Doors are opened too frequently or too long. Warm air enters the refrigerator whenever the door is
opened. Open the door less often.

Door is open slightly. See Occurrence section 

OPENING

/

CLOSING

 

OF

 

DOORS

/

DRAWERS

.

Condenser is dirty. Clean condenser. See "Outside" in 

Care and Cleaning

.

Freezer control is set too warm. Set the freezer control to a colder setting until the freezer temperature
is satisfactory. Allow 24 hours for the temperature to stabilize.

Refrigerator control is set too warm.  Refrigerator control has some effect on freezer temperature. Set
the refrigerator control to a colder setting. Allow 24 hours for the temperature to stabilize. Then, if the
freezer temperature is not right, set the freezer control to a warmer setting. Refer to 

Setting the Controls.

SOLUTION

Refrigerator runs too much or too
long.

Refrigerator compressor goes on and
off frequently.

Temperature in the freezer is too cold
and the refrigerator temperature is
satisfactory.

Temperature in the refrigerator is too
cold and the freezer temperature is
satisfactory.

Food stored in drawers freezes.

Temperature in the freezer or
refrigerator is too warm.

Temperature in the freezer is too warm.

Temperature in the refrigerator is too
warm and the freezer temperature is
satisfactory.

TEMPERATURES ARE TOO WARM

TEMPERATURES ARE TOO COLD

Summary of Contents for FRT21QRJZ3





















Reviews:

No comments

Brands by name

Popular brands

Load more brands