background image

2

Welcome & Congratulations

Congratulations on your purchase of a new refrigerator! We
here at 

Electrolux Home Products, Inc.

 are very proud of

our product and we are completly committed to providing
you with the best service possible. Your satisfaction is our
#1 priority.

Please read this Use & Care Manual very carefully. It contains
valuable information on how to properly maintain your new
refrigerator.

We know you’ll enjoy your new refrigerator and 

Thank You

for choosing our product. We hope you consider us for future
purchases.

PLEASE READ AND SAVE THESE INSTRUCTIONS

This Use & Care Manual provides specific operating
instructions for your model. Use your refrigerator only as
instructed in this manual. These instructions are not meant
to cover every possible condition and situation that may
occur. Common sense and caution must be practiced when
installing, operating and maintaining any appliance.

Please record your model and serial numbers below for
future reference. This information is found on your serial
plate located inside the refrigerator compartment.

NOTE:

 Use only soap and water to clean serial plate.

Model Number:

Serial Number:

Purchase Date:

Questions?

1-800-944-9044

(United States)

1-866-213-9397

(Canada)

Please complete and mail in the 

Product

Registration Card

 included with your

refrigerator.

Please attach sales receipt

here for future reference.

Extend Your Warranty Protection

With An

Extended Service Contract

CALL 

1-800-944-9044

To Enjoy These Benefits:

Total freedom from repair bills 

so

unexpected repairs won’t upset your
budget.

Fast, convenient toll-free service 

is just

a phone call away.

Top-quality repairs 

by factory-trained

experts.

Quick access to genuine replacement
parts 

so you can rest assured your

refrigerator is repaired with the proper
components.

Summary of Contents for FRT21HS6DQ - 20.5 cu. Ft. Top-Freezer Refrigerator






















Reviews: