Frigidaire FRT21GNHW0, User Manual

Page: 5 / 18

5
G05I0134
Fresh Food Storage
Tilt-Out Crisper (some models)
Cantilever Shelf
Sliding Shelf
Shelf Adjustment
Refrigerator shelves are easily adjustable to suit individual needs. Before adjusting
shelves, remove all food. The shipping clips, which stabilize the shelves for shipping may
be removed and discarded.
To adjust sliding shelves, remove by pulling forward to the
stop position, then lift the front edge up and pull out. Replace
on any pair of rails by reversing this procedure.
To adjust cantilever shelves (shelves supported at the rear of
the refrigerator), lift the back of the shelf up and out. Replace
shelf by inserting hooks at rear into wall bracket. Lower and
lock into position.
To adjust combination cantilever/sliding shelves, remove
shelf by lifting hooks up and out of rear wall bracket. Then
flex plastic clip towards center of refrigerator and pull shelf
straight out. Replace shelf by sliding plastic clip past side
wall support. Then lock hooks at rear into wall bracket.
Note: Plastic clip will automatically fit secure against side
wall.
Spillsafe
™
glass shelves (some models) catch and hold accidental spills. In some
models, the Spillsafe
™
shelves slide out for easy access to food and fast cleaning.
The shelves slide out independently of the cantilever brackets. Just pull front of shelf
forward. Shelf can be extended as far as stopper will allow and is not removable from
the cantilever bracket.
Door Storage
Door bins and shelves are provided for convenient storage of jars, bottles, and cans.
Items used often are available for quick selection.
Some models have adjustable door bins which can be moved to suit individual
needs. To move the bins, remove by lifting straight up. Place the bin in the desired
position and lower over supports.
The Dairy compartment is warmer than the general food storage section and is
intended for short term storage of cheese, spreads, or butter.
Crispers
The Crispers, located under the bottom refrigerator shelf, are designed for storing
fruits, vegetables, and other fresh produce. Wash items in clear water and remove
excess water before placing in the Crispers. Items with strong odors or high moisture
should be wrapped before storing. In some models, the Crispers are drawers, in
others, they are tilt-out bins.
The Humidity Control (some models with Crisper drawers) allows you to adjust the
humidity within the Crisper. This can extend the life of fresh vegetables which keep
best in high humidity. Leafy vegetables, however, keep best when stored with the
Humidity Control set on HIGH, or in a drawer without a Humidity Control. This keeps
incoming air to a minimum and maintains maximum moisture content.
Deli Drawer
(some models)
Some models are equipped with a Deli Drawer for storage of luncheon meats,
spreads, cheeses, and other deli items.
Meat Pan
(some models)
Some models are equipped with a Meat Pan that can be positioned below any
refrigerator shelf. Use this pan for short term storage of bulk meat items. If meats
are to be kept longer than 1 or 2 days, they should be frozen.
Combination Cantilever/Sliding Shelf with
Plastic Clip
Adjustable Humidity Control
FRESH FRUITS
& VEGETABLES
LOWER
FRUITS HIGHER
HUMIDITY
CONTROL
VEGETABL
ES
CLIP
TALLY
Remove Shipping Clips