Frigidaire FRT18QGFW3, User Manual

Page: 10 / 19

1 0
or
4. Remove hinge pin, hinge, and the two
screws attaching the lower hinge. Save
the hinge, hinge pin, washer (some
models) and screws for reassembly
later.
G05I0101
Freezer Door
G05I0090
6. After the handles are removed (see
steps 7 and 8), remove door stop from
bottom of freezer and refrigerator door
and reinstall on opposite side.
Refrigerator Door
G05I0103 new
G05I0106 new
2. Open the freezer door enough to
allow it to be lifted off the center hinge.
3. With the refrigerator door closed,
remove center hinge pin. (Note the
arrangement of the upper and lower
washers (some models) on the hinge pin.
The washers must be assembled later in the
same manner.) Open refrigerator door
enough to allow door to be lifted off the
lower hinge. Remove the two screws
attaching the center hinge. The third
outermost screw under the center hinge
should be left in place. Save hinge, pin,
and washers (some models) for
reassembly later. Reinstall screws in
original holes.
5. Carefully remove the hole plugs from
the hinge holes in the center mullion and
top of cabinet and reinstall in the
opposite set of holes.
Your refrigerator is equipped with convertible door hinges. Hinging of the door can
be changed to the opposite side any time you wish. An envelope containing extra
plastic hole plugs is included in some models. Turn the refrigerator control to OFF.
Remove all food, bottles, and other items from the door. Begin with freezer door.
Completely remove one door before beginning the other.
Reversible Door
Instructions
1. Refer to the Instruction Sheet, packed
with the Toe Grille, to remove the Toe
Grille (some models). Snap off hinge
cover at top of cabinet (some models).
With the freezer door closed, remove
the two screws attaching upper hinge to
cabinet. Lift the hinge up and off. Be
sure to save screws and hinge for
reassembly later.