11
DOOR HANDLE INSTALLATION
1. Remove handles from carton and
any other protective packaging.
2. Position the freezer handle end caps
over the upper and lower pre-in-
stalled shoulder bolts (A) that are
fastened into door, ensuring the
holes for the set screws are facing
toward the refrigerator door.
3. While holding the handle firmly
against door, fasten the upper and
lower Allen set screws (B) with the
supplied Allen wrench.
4. Repeat steps 2 and 3 to install
refrigerator handle. Ensure the holes
for the set screws are facing towards
the freezer door.
Freezer
Upper
End Cap
Door
Refrigerator
Upper
End Cap
Door
Refrigerator
Lower
End Cap
Door
Freezer
Lower
End Cap
Door
Ensure Handle Set Screws are Facing Each Other with Doors Closed
CAUTION
Wear gloves and safety goggles and
use extreme CAUTION when installing
these handles. The rounded end of the
handles may be sharp (some models).
NOTE
Tighten and sub-flush all set screws (place the Allen set screw just below the sur-
face of the end cap) of the handle end cap. Draw the end caps tight to the freezer
and refrigerator doors with no gaps. To avoid scratching the metal door, keep the
door open while torquing down the set screws.
IMPORTANT
To ensure proper installation of handles,
please review these instructions and il-
lustrations thoroughly prior to installing
the handles.
