Attention
Fixing the Installation Plate
Drilling the Hole
1. Install the installation plate
horizontally over the structural
parts on the wall using the spaces
indicated on the plate, as shown
2. In the case of tiled, concrete or
diameter holes. Place anchorage
supports for the appropriate
assembly screws.
3. Fix the installation plate to the
1. Determine the position of the
installation plate and drill the
downward.
2. Always use a pipe cover with an
Installation plate
Fit the Installation Plate and drill holes
in the wall according to the wall
structure and corresponding mounting
points on the installation plate
(Dimensions are in “mm” unless
otherwise stated).
Wall
Indoor unit
Outdoor unit
Indoor unit installation
(B)
Indoor unit outline
Installation plate
the ceiling
from the wall
from the wall
Refrigerant pipe
Refrigerant pipe
Capacity < 12000 Btu's
3.15
in the figures above.
A type screws.
wall with eight
hole for the pipes using the
pipe hole so that it is tilted slightly
opening when drilling.
6" or more from
5" or more
hole (left) Ø 2.56"
hole (right) Ø 2.56"
5" or more
3.55"
1.77"
1.77"
10.72"
11.54"
19.27"
1.77"
36.25"
0.2"-
0.
28"
4. At all times securing to the wall
studs is recommended.
similar walls, create 0.2 inch
12
