manualshive.com logo in svg

Frigidaire FRFC2323AS, Use & Care Manual

Share
Download
Frigidaire FRFC2323AS Use & Care Manual Download Page 42

42

CARE & CLEANING

Vacation and moving tips

Occasion Tips

Short 

Vacations

•  Leave refrigerator operating during vacations of three weeks or less.

•  Use all perishable items from refrigerator compartment.

•  Turn automatic ice maker off and empty ice bucket, even if you will 

only be gone a few days.

Long 

Vacations

•  Remove all food and ice if you will be gone one month or more.

•  Turn the cooling system off (see “Controls” section for location of On/

Off button) and disconnect power cord.

•  Turn water supply valve to closed position.

•  Clean interior thoroughly.

•  Leave both doors open to prevent odors and mold build-up. Block 

doors open if necessary.

Moving

•  Unplug unit

•  Remove all food and ice.

•  Recommend use of a handcart, load from the side.

•  Adjust rollers all the way up to protect them during sliding or moving. 

•  Pad cabinet to avoid scratching surface.

Care & Cleaning Tips

Part

What To Use

Tips and Precautions

Interior & Door 

Liners

•  Soap and water

•  Baking soda and 

water

Use two tablespoons of baking soda in one quart 

of warm water. 

Be sure to wring excess water 

out of sponge or cloth before cleaning around 

controls, light bulb or any electrical part.

Door Gaskets

•  Soap and water

Wipe gaskets with a clean soft cloth.

Drawers & Bins

•  Soap and water

Use a soft cloth to clean drawer runners and tracks.

Glass Shelves

•  Soap and water

•  Glass cleaner

•  Mild liquid sprays

Allow glass to warm to room temperature 

before immersing in warm water.

Toe Grille

•  Soap and water

•  Mild liquid sprays

•  Vacuum 

attachment

Vacuum dust from front of toe grille. Remove 

toe grille (see Installation Instructions). 

Vacuum backside, wipe with sudsy cloth or 

sponge. Rinse and dry.

Exterior & 

Handles

•  Soap and water

•  Non Abrasive 

Glass Cleaner

Do not use commercial household cleaners 

containing ammonia, bleach or alcohol to 

clean handles. Use a soft cloth to clean 

smooth handles. 

DO NOT use a dry cloth to 

clean smooth doors.

Part

What To Use

Tips and Precautions

Exterior & 

Handles
(Stainless Steel 

Models Only)

•  Soap and water

•  Stainless Steel 

Cleaners

Never use CHLORIDE or cleaners with 

bleach to clean stainless steel.

Clean stainless steel front and handles with 

non-abrasive soapy water and a dishcloth. 

Rinse with clean water and a soft cloth. Use 

a non-abrasive stainless steel cleaner. These 

cleaners can be purchased at most home 

improvement or major department stores. 

Always follow manufacturer’s instructions. 

Do not use household cleaners containing 

ammonia or bleach.

NOTE:  Always clean, wipe and dry with the 

grain to prevent scratching.

 Wash the rest of 

the cabinet with warm water and mild liquid 

detergent. Rinse well, and wipe dry with a 

clean soft cloth.

Summary of Contents for FRFC2323AS



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands