8
Operating Instructions
Operating Instructions
(continued)
Note: In this mode the selected temperature will increase by 2 °F 30 minutes after the mode is selected. The temperature will then
increase by another 2 °F after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to
the originally selected temperature. This ends the "Sleep" mode and the unit will continue to operate as originally programmed.
The "Sleep" mode program can be cancelled at any time during operation by again pressing the "Sleep" button.
SLEEP FEATURE:
YOU WILL SEE:
CLEAN AIR FEATURE(on some models):
YOU WILL SEE:
2009 Electrolux Home Products, Inc.
All rights reserved.
Note: This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation. The LED (light) will
illuminate after 250 hours of operation. To reset after cleaning the filter, press the "Filter Reset" button and the light will go off.
Note: When this feature is "ON", the electronic air purifier is energized to remove pollen and impurities from the air. To cancel this
feature, press the Clean Air button (the LIGHT will turn off).
DO THIS:
PRESS FILTER
RESET BUTTON
DO THIS:
PRESS
CLEAN AIR
BUTTON
DO THIS:
PRESS
SLEEP BUTTON
Note: This feature can be activated on the unit touch pad ONLY.
CHECK FILTER FEATURE, YOU WILL SEE:
