7
OPERATING INSTRUCTIONS
Status Window
The STATUS window, available on some models,
indicates the following activity:
1-24.............
Number of delay start
hours. The last hour
will count down in
minutes.
CL....................
Close dishwasher
door. The status
indicator lights will
also fl ash to indicate
current cycle status.
MINUTES..........
Number of minutes
left in cycle (1-199).
Status Indicator Lights
The CLEAN light will remain on until the door is
opened.
When the SANITIZE option is selected and the
criteria is met, the Sanitized indicator will display
and remain on until the door is opened. If the
sanitization criteria is not achieved, the indicator
will not display. This can happen if the cycle is
interrupted or if the sanitization temperature
could not be reached due to incoming water
temperature signifi cantly below 120
0
F.
Green Light
Green Light
When the GREEN LIGHT illuminates on the fl oor
When the GREEN LIGHT illuminates on the fl oor
this indicates that the wash cycle is complete.
this indicates that the wash cycle is complete.
L0----L6............ Level of Rinse Aid
L0----L6............ Level of Rinse Aid
dosage.
dosage.
E r r o r C o d e s
Displayed
Error Code*
Problem
Solution
i10
A low fi ll has been
detected.
Look for a pinched water supply line, or water shutoff is
not completely opened.
i20;
i40;
iF0
Clogged fi lters or a
restricted drain line
has been detected.
Check and clean both fi lters and sump area and check
for a pinched or blocked drain hose. If the drain line is
attached to a disposer, check that the knockout plug has
been removed.
i30
A leak or overfl ow
of water has been
detected in the
bottom pan.
Look for loose connections at the water inlet valve and
ensure the unit is properly leveled.
i50
A problem has been
detected with the
drain or wash motor.
i60
A problem has been
detected with the
water heating system.
iC0
A problem has been
detected with the
electronic control
system.
Pressing the cancel button or turning power off at the
breaker for 5 min. should clear this error code and the
unit can be restarted.
If this does not resolve the problem, service
will need to be called.
*In all Error Code instances, if Pressing the cancel button or turning power off at the breaker for
5 min. does not resolve the problem, contact the Frigidaire Customer Care Center at 1-800-944-
9044.
