background image

9

Problem

Reason

  TROUBLE-SHOOTING

The machine does  not work

Power failure  
Machine is not plugged in and powered up.
Pulsator is  clogged

The draining does not work

Drain hose is not kept down.
Drain hose is frozen. 
Drain hose is blocked. 
Clothes outside spin tub.

Abnormal noise during 
washing

There are hairpins, coins,  or metal items in 
wash tub 

Abnormal noise and violent 
vibration  during  spinning

Machine is not level.
Safety cover not properly placed.
Clothes are  outside  spinning tub. 
Amount of clothes beyond stated capacity.

Water flows from the drain
hose during 

 

 first use

It is the  water remained  from  factory 
inspection of  performance.

     WARNING
            

3.This appliance is not intended for use by persons(including children) with reduced
    physical,sensory or mental capabilities or lack of experience and knowledge,unless
    they have been given supervision or instruction concerning use of the appliance by 
    a person responsible for their safety.
4.Children should be supervised to ensure that they do not play with the appliance.

1.If the supply cord is damage,it must be replaced by the manufacturer
   or its service agent or similarly qualified persons in order to avoid a hazard.
2.For washing machine with ventilation openings in the base,that a carpet
   must not obstruct the opening.

     NOTE
            

1.Maximum pressure allowed at the water inlet:0.6MPa.   

3.The new hose-sets supplied with the appliance are to be used and that old hose-sets
    should not be reused.

2.Minimum pressure allowed at the water inlet:0.03MPa.   

Summary of Contents for FLBY06GGAWF











Reviews: