Accessories information available
on the web at
frigidaire.com
Double Wall Ovens
FGET3065K F / W/B
30" Electric
USA
•
10200 David Taylor Drive
•
Charlotte, NC 28262
•
1-800-FRIGIDAIRE
•
frigidaire.com
CANADA
•
5855 Terry Fox Way
•
Mississauga, ON L5V 3E4
•
1-800-265-8352
•
frigidaire.ca
FGET3065K 01/11
© 2011 Electrolux Home Products, Inc.
Printed in the U.S.A.
Specifications
subject to change.
30" Double Electric Wall Oven
Gallery
•
To adapt oven to fit cutout height greater than 49-7/8", optional
3"-High Bottom Trim available.
•
Full oven base of solid plywood or similar material required,
capable of supporting 375 Lbs.
•
Base must be level and cabinet front must be square.
•
Double Wall Ovens are NOT approved to be used in stackable or
side-by-side installation.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
Optional Accessories
•
3"-High Stainless Steel Bottom Trim – (PN # 318259707).
•
3"-High White Bottom Trim – (PN # 318259703).
•
3"-High Black Bottom Trim – (PN # 318259704).
Double Wall Oven Specifications
•
Product Shipping Weight (approx.) – 300 Lbs.
•
Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz
AC only electrical supply with ground required on separate circuit
fused on both sides of line.
•
Connected Load (kW Rating) @ 240 / 208 Volts = 9.4 / 7.1 kW
•
Amps @ 240 / 208 Volts = 39.2 / 34.1 Amps
•
Recommended Circuit Breaker – 40 Amps
•
Always consult local and national electric codes.
•
Minimum 21" clearance for oven door depth when open.
•
Suggested distance from floor is 11-1/2". Minimum required distance
is 4-1/2".
•
Minimum 23-1/2" deep cutout dimension is critical for proper
installation, to ensure that oven’s faceplate will fit flush against
cabinet front.
•
To adapt oven to fit cutout height greater than 49-1/2", add one
2"-wide wood shim of appropriate height to each side of opening
under oven side rails. Lifting oven will hide larger cutout opening
at top and oven’s 1"-high bottom trim will hide shims at bottom.
(Standard 1"-High Bottom Trim included.)
