16
setting oven controls
setting silent control oPeration
The
delaY time
and
clean
pads control the Silent
Control operation feature. The Silent Control operation
feature allows the oven control to be operated without
sounds or beeps whenever necessary. If desired the
control can be programmed for silent operation and later
returned to operating with all the normal sounds and
beeps.
To change control from normal sound operation to
silent control operation
1. To tell if your range is set for normal or silent
operation press and hold
delaY time
.
"
-- --
"
will
appear and
"
delaY
"
will flash in the display. After 6
seconds
"
beeP on
"
or
"
beeP oFF
"
will appear in the
display.
2. Press
clean
to switch between normal sound
operation and silent operation mode. The display will
show either
"
beeP on
"
or
"
beeP oFF
"
.
Note: If
"
beeP on
"
appears, the control will operate with
normal sounds and beeps. If
"
beeP oFF
"
appears, the
control is in the silent operation mode.
3. Press
start
to accept the change or press
oFF
to
reject the change.
Note:
The control will always beep at the end of a minute
timer and will beep when a set temperature has been
reached, even if the control is set to silent operation.
setting minute timer
The
timer on.oFF
pad controls the Minute Timer
feature. The Minute Timer serves as an extra timer in
the kitchen that will beep when the set time has run
out. It does not start or stop cooking. The Minute Timer
feature can be used during any of the other oven control
functions. Refer to
“
Minimum and Maximum Control Pad
Settings
”
for time amount settings.
to set the minute timer
(example for 5 minutes)
1. Press
timer on.oFF.
“
-- --
”
will appear in the
display.
2. Use the number pads to set the desired time in the
display; press
5
.
3. Press
start
. The time will begin to count down with
“
5:00
”
in the display.
Note: If
start
is not pressed the timer will return to the
time of day after 25 seconds.
4. When the set time has run out,
“
end
”
will show in
the display. The clock will sound with 3 beeps every
25 seconds until
timer on.oFF
is pressed.
to clear the minute timer before the set time
has run out
1. Press
timer on.oFF
. The display will return to the
time of day.
setting add a minute Feature
The
add a minute
pad is used to set the Add A
Minute feature. When the
add a minute
pas is
pressed, 1 minute is added to the Timer feature if this
feature is already active. If the Timer feature is not active
and the
add a minute
pas is pressed, the Timer
feature will become active and will begin counting down
from 1 minute.
setting lockout Feature
The
pad controls the Lockout feature. The Lockout
feature automatically locks the selected oven door and the
control panel. This feature will not lock both oven doors at
the same time. Also, it will not lock the cooktop. It does
not disable the Minute Timer or the interior oven lights.
To activate the Lockout feature
1. Press
uPPer
or
loWer
to select oven.
2. Press and hold
for 3 seconds.
3. After 3 seconds
"
loc
"
and
"
door
"
will appear, a beep
will sound,
"
uPPer
"
,
"
loWer
"
and
"
door
"
will flash
in the display. Once the oven door is locked the
"
door
"
will stop flashing and remain on along with the
"
loc
"
,
the icon will appear.
To reactivate normal operation:
1. Press
uPPer
or
loWer
to select oven.
2. Press and hold
for 3 seconds. A beep will sound.
The
"
door &
"
will flash and "
door oPn
" appear in
the display until the oven door has completely unlocked.
When unlocked "
door &
"
&
"
door oPn
" disappear
from the display. The time of day reappear in the display.
3. The unit is again fully operational.
