background image

Record Your Model and Serial Numbers

Record in the space provided below the model and serial numbers. On all models, the

serial plate is located on the outside of the cabinet.

Model No.

Serial No.

Register Your Product

The self-addressed PRODUCT REGISTRATION CARD should be filled in completely,

signed and returned to the Frigidaire Company.

Normal Sounds

Today’s high efficiency compressors

may have a high pitched chatter

during the cooling cycle. 

High pitched Chatter

Unit may vibrate and make noise

because of poor wall or window

construction or incorrect installation. 

Vibration

Pinging or Swishing

Sound of Rushing Air

At the front of the unit, you may

hear the sound of rushing air

being moved by the fan. 

Gurgle/Hiss

“Gurgling or hissing” noise may be 

heard due to refrigerant passing 

through evaporator during normal 

operation. 

Product Registration 

Product Registration, Packaging & Normal Sounds

Packaging

Remove all packaging from inside the carton, along with any

inserts placed into the side louvers.

PACKAGING  INSERTS

Droplets of water hitting condenser

during normal operation may cause

“pinging or swishing” sounds. 
Note: Don’t try to drill any holes 

on the base pan to eliminate the 

normal sounds, otherwise it will 

void the warranty.

5

2009 Electrolux Home Products, I

.

d

e

v

r

e

s

e

r

 

s

t

h

g

ir

 l

l

A

.

c

n

Summary of Contents for FFRC0833R1














Reviews: