8
Operating Instructions
Operating Instructions
(continued)
FAULT CODES
If the display reads "AS" ,
a sensor has failed. Contact
your Authorized Frigidaire
Service Center.
TO TURN UNlT OFF:
DO THIS:
PRESS ON/
OFF BUTTON
2009 Electrolux Home Products, I
.
d
e
v
r
e
s
e
r
s
t
h
g
ir
l
l
A
.
c
n
Note: The control is capable of displaying temperature
in degrees Fahrenheit or degrees Celsius.
TO CHANGE TEMPERATURE DISPLAY:
YOU WILL SEE:
DO THIS:
PRESS AND HOLD
THE UP/DOWN
BUTTONS TOGETHER
FOR 3 SECONDS
Note: If the unit is turned off in heat mode
(if applicable) or fan only mode, it will return
to the same setting when it is turned on again.
When the unit is turned off in cool or energy
saver mode, it will run in energy saver mode.
when it is turned on again, but the setting of
temperature and fan speed will remain.
DO THIS:
PRESS FILTER
RESET BUTTON
CHECK FILTER FEATURE, YOU WILL SEE:
Note: This feature is a reminder
to clean the Air Filter (See Care
and Cleaning) for more efficient
operation. The LED (light) will
illuminate after 250 hours of
operation. To reset after cleaning
the filter, press the "Filter Reset"
button and the light will go off.
