Frigidaire FFEF3015L S, Use & Care Manual

Page: 11 / 24

11
OVEN CONTROL FUNCTIONS
Changing temperature display (°F or °C)
The electronic oven control is set to display °F (Fahrenheit)
when shipped from the factory. The display may be
changed to show either Fahrenheit or Celsius oven
temperatures.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
For satisfactory use of your oven, become familiar with the various pad features and functions of the oven as described below.
Up and down arrow pads — Use to
adjust the oven temperature, clean time
and when adjusting the clock or minute
timer. Also used with many feature or
function pads to make adjustments.
Bake pad —Use to select
the bake feature.
Feature indicator
lights — These
indicator lights show
which feature is active.
Clock pad — Use to
set the time of day.
Timer on-off pad —
Use to set or cancel
the minute timer. The
minute timer does not
start or stop cooking.
Timer on-off pad is
used to set the
continuous bake
function.
Setting the clock
When the appliance is first plugged in or when the power
supply to the appliance has been interrupted, the display
will flash "12:00". It is recommended to always set the
clock for the correct time of day before using the appliance.
To set the clock:
1. Press clock once (do not hold key pad down).
2. Within 5 seconds, press and hold the or until
the correct time of day appears in the display.
SETTING OVEN CONTROLS
The clock cannot be changed when the oven is set for
cooking or clean is active.
NOTE
To change the temperature to display °C (Celsius) or
from °C to °F:
1. Press broil . "— —" appears in the display.
2. Press and hold the until "HI" appears in the
display.
3. Press and hold broil until °F or °C appears in the
display.
4. Press the or to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating
mode.
The temperature display feature cannot be changed
when the oven is set for cooking or clean is active.
NOTE
Oven, preheat & door locked lights — The "oven" light will
glow each time the oven turns on to maintain the set oven
temperature. The "preheat" light will glow when the oven is
first set to operate, or if the desired temperature is reset higher
than the actual oven temperature. The "door locked" light will
flash when the oven door locks and unlocks, the oven door
lockout is active or when the self-clean cycle feature is active.
Broil pad — Use to
select the variable
broil feature.
Clean pad — Use
to set a Self-Clean
cycle.
Clear off pad — Use to
clear any feature
previously entered except
the time of day and
minute timer. Press clear
off to stop cooking.
Also use clear off to
activate oven lockout
feature.