Frigidaire FFCD2418UB Use & Care Manual Download Page 5

5

OPERATING INSTRUCTIONS

Option Selections 
Sanitize Option

To sanitize your dishes and glassware, select 

SANITIZE option.  When selected, the light 

above the pad will come on and remain on until 

end of cycle.  The water temperature in the 

final rinse will be raised to 155

o

F (68

o

C) and will 

maintain that temperature for 9 minutes.  This 

option is available in Heavy and Normal Cycles.  

Only these sanitization cycles have been 

designed to meet NSF requirements.

The cycle time will be extended until the proper 

water temperature is reached.  

 Washing 

action will continue during the water heating 

delay.  For best results, the incoming water 

temperature should be at least 120

o

F (49

o

C).

The sanitize criteria may not be satisfied if 

there is an interruption of the cycle, power 

failure or if the incoming water temperature is 

below 120

o

F (49

o

C).

To turn off the SANITIZE option, press the pad a 

second time.  The light above the pad will turn off.

High Temp Wash Option 

When HI-TEMP WASH option is selected, the 

dishwasher heats water in the main wash to 

approximately 140

o

F (60

o

C).

This increase in water temperature helps the 

dishwasher detergent remove food grease 

and soil from dishes more effectively and 

aids in improved drying performance.  HIGH 

TEMP WASH option can be used with all cycles 

except RINSE ONLY.  HIGH TEMP WASH is 

automatically provided when the HEAVY WASH 

cycle is selected.
When HIGH TEMP WASH option is selected, the 

light above the pad will come on and remain on 

until end of cycle.  To turn off the HIGH TEMP 

WASH option, press the pad a second time.  

The light above the pad will turn off.

NOTE

Not all cycles and options available on all 

models.

Heat Dry

The HEAT DRY option in combination with rinse 

aid will enhance drying performance.  The 

energy required to use the HEAT DRY option 

costs pennies per cycle; however you will 

have items in your dish load that will not be 

completely dry at the end of the cycle.

Child Lock Controls

To prevent children from accidently changing 

the dishwasher cycle or starting the dishwasher, 

lock the dishwasher controls by pressing the 

OPTIONS pad for 3 seconds while the door is 

latched.  An indicator light on the lock graphic 

pad will illuminate when the controls are locked 

and no new selections can be made until the 

lock is released.  To unlock the controls, press 

the same pad, OPTIONS, again for 3 seconds 

until the indicator light goes out.

Status Indicator Lights

When the SANITIZE option is selected, the 

SANITIZED light will glow when the SANITIZE 

cycle is finished.  If the dishwasher did not 

properly sanitize the dishes, the light will not 

come on.  This can happen if the cycle is 

interrupted.  The light will remain on until the 

door is opened.
The CLEAN light will come on at the end of 

cycle and remain on until the door is opened.

Delay Start

The DELAY START option allows you to 

automatically delay starting your dishwasher for 

4 hours.
To activate delay start option for 4 hour delay, 

press the OPTIONS pad once.  A light will come 

on indicating the delay start hours and will 

remain on until cycle starts.  Press the START/

CANCEL pad to start the delay option.  If the 

delay option is interrupted, the START/CANCEL 

pad will have to be pressed again to return to 

delay option.
To cancel the DELAY START option and begin 

the cycle before the delay period is over, 

press and hold the START/CANCEL 

pad for 3 

seconds.

To Cancel a Cycle

You can cancel a cycle anytime during the cycle.  

Press and hold the START/CANCEL pad for 3 

seconds.  The light above the cycle and option 

selected will go out, the START/CANCEL light 

NOTE

If the dishwasher door is opened while the 

unit is running, the START/CANCEL pad must 

be pressed and the door shut immediately 

to return the unit to the selected cycle and 

option, this must happen within 10 minutes 

for the unit to continue the cycle.

Select the NORMAL WASH and HI-TEMP WASH 

pads along with a Rinse Aid agent for improved 

drying performance. 

Drying Tip

will remain illuminated, the dishwasher will start 

a 90 second drain.  At the end of the drain, 

select the next desired cycle.

Summary of Contents for FFCD2418UB

















Reviews: