Frigidaire FEF389CFTH, Owner'S Manual

Page: 12 / 28

12
Setting Oven Controls
To Set or Change the Temperature for Normal Baking
The oven can be programmed to bake at any temperature from 170°F to 550°F.
1. Push
. "— — —°" and the word "BAKE" will glow in the display.
2. Push or . The display will show "350°." By holding
or , the temperature can then be adjusted in 5°F
increments.
3. As soon as or is released, the oven will begin heating to
the selected temperature. The display will show the actual oven temperature
as it increases to the desired setting. If preheating is necessary, wait 10
minutes for the oven to cycle after the selected temperature is shown in the
display.
4. To cancel the baking function, push .
To Set or Change the Temperature for Convection Baking
Roasting
Due to better heat distribution inside the oven, lower temperatures can be used
when using the convection mode. This temperature adjustment is automatically
made by the electronic oven control. When using the convection mode, the
actual oven temperature will be 25°F lower than the displayed temperature.
This allows you to use your existing recipes without having to manually adjust
the temperature down.
Remember to use tested recipes with times adjusted for convection baking/
roasting when using the convection mode. Times may be reduced by as much
as 30% when using the convection feature.
1. Push
. "_ _ _°" and the word "BAKE" will glow in the display.
2. Push and hold or until the desired baking temperature
appears in the display. The electronic oven control will adjust the oven
temperature as necessary for convection baking.
3. As soon as or is released, the oven will begin heating and
the fan in the rear of the oven will turn on. The fan stays on while the oven
door is closed and shuts off when the oven door is opened.
4. To cancel the convection baking/roasting function, push .
To change the temperature after convection baking/roasting has begun,
repeat steps 1 and 2 above.