9
SET UP AND OPERATION
Carefully remove all packaging materials and retain for future storage/use. Make
sure there is no residual foam left in any of the components. No tools will be
required to assemble this evaporative cooler.
1.
Choose a suitable location for your evaporative cooler. This product works
best in areas with a fresh air supply.
2.
Fill the water tank with clean water through the water inlet. Ice cubes may
also be used for added cooling. Ensure that the casters are locked with the
lever fully up. This is so the casters can support the weight of the unit.
3.
Connect the unit to a power supply and turn the SPEED dial. The fan will
start.
4.
To begin cooling, turn the COOLER dial to the ON position. To experience
the full cooling effect, wait a few minutes for the cooling pads to become
fully saturated with water.
5.
Periodically check the water level on the water level indicator. If the water
tank is running low on water, turn the COOLER dial to the OFF position
and add more water/ice.
6.
To turn the unit off, turn the COOLER dial to the OFF position and the
SPEED dial to the OFF position. If the unit will not be used for an extended
period of time, empty the water tank by unplugging the drain plug located
on the back of the evaporative cooler.
