Frigidaire FDB857RJS1 Use And Care Manual Download Page 7

7

Preparing and Loading Dishes

Dish Preparation

Scrape away large pieces of food, bones, pits,
toothpicks, etc. The continuous filtered wash
system will remove remaining food particles.
Burned-on foods should be loosened before
loading. Empty liquids from glasses and cups.

Foods such as mustard, mayonnaise, vinegar,
lemon juice and tomato based products may
cause discoloration of stainless steel and
plastics if allowed to sit for a long period of
time. Unless the dishwasher is to be operated
at once, it is best to rinse off these food soils.

Load racks so that large items do not
prevent the detergent dispenser from
opening.

Check manufacturer's recommendations
before washing items in question.

If the dishwasher drains into a food
disposer, be sure disposer is completely
empty before starting dishwasher.

Do not cover funnel

Loading the Top Rack

Features and appearance of racks and
silverware basket may vary from your model.

Important: Do not cover the funnel when
loading.

The top rack is designed for cups, glasses
small plates, saucers and bowls.

Load glasses in top rack. Damage may occur if
placed in bottom rack.

Load plastic items in top rack only. Melting may
occur if placed in bottom rack.

Load items with open ends facing down for
better cleaning and draining.

Damage may occur if delicate items touch
each other during dishwasher operation.

Long-handled knives and utensils can be
placed in top rack.

Be sure nothing protrudes through the bottom
of the rack to block rotation of middle spray
arm.

Some models have a fold-down cup shelf or a
cup shelf/stemware holder. They can be used
to load two levels of cups, juice glasses, and
other short items. Stagger items on upper level
so that water can reach all inside surfaces.
Fold up to load tall glasses.

Summary of Contents for FDB857RJS1

















Reviews: