background image

2

Welcome & Congratulations

Please retain this manual for future reference
© 2004 Electrolux Home Products, Inc    All rights reserved

Questions?

1-800-Frigidaire

Congratulations on your purchase of a new grill! We at
Electrolux Home Products are very proud of our product
and we are completely committed to providing you with
the best service possible. Your satisfaction is our #1
priority.

Please read this Use & Care Manual very carefully. It
contains valuable information on how to properly maintain
your new grill.

We know you’ll enjoy your new grill and thank you for
choosing our product. We hope you consider us for future
purchases.

PLEASE READ AND SAVE THESE INSTRUCTIONS

This Use & Care Manual provides specific operating
instructions for your model. Use your grill only as
instructed in this manual. These instructions are not
meant to cover every possible condition and situation
that may occur. Common sense and caution must be
practiced when installing, operating and maintaining any
appliance.

Please record your model and serial numbers below
for future reference. This information is found on the
serial plate located on the back of the built-in grill or
on the inside of the cart door (complete grill & cart
model).

NOTE: Use only soap and water to clean the serial
plate.

Model Number:

Serial Number:

Purchase Date:

Gas Type:

Please complete and mail in the 

Product

Registration Card

 included with your grill.

Please attach sales receipt here

for future reference.

Register Your  Product

The PRODUCT REGISTRATION CARD
should be filled in completely, signed and
returned to Electrolux Home Products North
America.

Summary of Contents for FD27LKEC





















Reviews: