7
TO USE AUTO COOL FEATURE:
YOU WILL SEE:
DO THIS:
PRESS AUTO
COOL
Note:
Fan starts at High Speed and adjusts to a slower speed as the
room temperature dictates. For example if the room doesn’t get too
warm, it will stay at the slowest speed. If the room temperature rises
quickly, such as a door being opened, it will automatically go to the
highest speed. The fan speeds will re-adjust back to the slowest speed
as the room returns to the original set temperature. Press either the
fan slower or fan faster button to adjust the fan speed manually.
TO OPERATE ON FAN ONLY:
DO THIS:
PRESS MODE
BUTTON
CHOOSE FAN
ONLY
Note:
Use this function only when cooling is not desired, such as for
room air circulation or to exhaust stale air. (Remember to open the
vent during this function, but keep it closed during cooling for maximum
cooling efficiency.) You can choose any fan speed you prefer.
During this function, the display will show the actual room temperature,
not the set temperature as in the cooling mode.
TO USE THE ENERGY SAVER
FEATURE:
DO THIS:
PRESS MODE
BUTTON
CHOOSE
ENERGY SAVER
Note:
In this mode, the fan will continue to run for 3 minutes after the
compressor shuts off. The fan then cycles on for 2 minutes at 10 minute
intervals until the room temperature is above the set temperature, at
which time the compressor turns back on and cooling stars.
YOU WILL SEE:
YOU WILL SEE:
Air Conditioner Features
(continued)
LIGHT On
LIGHT On
LIGHT On
SZ000302(En)-YaoKong(1018)
10/25/2004, 2:33 PM
7
