background image

AUTO

AUTO

Auto
Cool

Auto
Cool

Clean
   Air

Clean
   Air

Cool

Energy Saver

Fan

Heat

Mode

Mode

Temp  /Timer

Temp  /Timer

Temp  /Timer

Temp  /Timer

F

a

n

 S

lo

w

e

r

F

a

n

 S

lo

w

e

r

F

a

n

 F

a

st

e

r

F

a

n

 F

a

st

e

r

On/Off

On/Off

Sleep

Sleep

Check
  Filter

Check
  Filter

Remote
Sensing

Timer

Timer

Operation of Current 
Device

                           To reduce the risk of fire, electric shock, or injury to persons, read the 
IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. 

WARNING

!

The power supply cord contains a current device that senses damage to the power cord. To 
test your power supply cord do the following:
1. Plug in the Air Conditioner.
2. The power  supply cord will have TWO buttons on the plug head. Press the TEST button.
    You will notice a click as the RESET button pops out.
3. Press the RESET button. Again you will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products this is 
    also indicated by a light on the plug head).

NOTES:

Do not use this device to turn the u

nit on or off.

Always make sure the RESET button is pushed in for correct operation.
The power supply cord must be replaced if it fails to reset when either the TEST button is

    pushed, or it cannot be reset. A new one can be obtained from the product manufacturer.

If power supply  cord is  damaged, it  CANNOT  be  repaired. It MUST be replaced by one

    obtained from the product manufacturer.

ELECTRONIC CONTROL OPERATING INSTRUCTIONS

Before  you  begin,  thoroughly  familiarize  yourself  with  the  control panel and remote as
shown  below  and  all  its  functions,  then  follow  the  symbol  for the functions you desire.

The unit can be controlled by the control panel alone or with the remote.

Air Conditioner
Features

TURNS UNIT
ON OR OFF

ACTIVATES 
TIMER

SETS  FAN
SPEEDS

CHECK FILTER
RESET BUTTON

SETS 
MODE

SLEEP 
MODE

Control panel

Remote with digital display &
remote sensing feature

AUTO COOL
FEATURE

ADJUSTS
TEMPERATURE
OR TIME

CLEAN AIR 
FEATURE

(SOME MODELS)

REMOTE TEMP.
SENSING 
INDICATOR

(SOME MODELS)

TURNS UNIT
ON OR OFF

SETS 
MODE

ACTIVATES
REMOTE
THERMOSTAT
(some models)

ADJUSTS
TEMPERATURE
OR TIME

SETS  
FAN
SPEEDS

5

ACTIVATES
TIMER

LIGHT

TURNS UNIT
ON OR OFF

SETS 
MODE

ADJUSTS
TEMPERATURE
OR TIME

SETS  
FAN
SPEEDS

ACTIVATES
TIMER

LIGHT

Standard
remote

Remote for 
HEAT models

Heat

HEAT
MODE

SETS 
MODE

ADJUSTS
TEMPERATURE
OR TIME

TURNS UNIT
ON OR OFF

SETS  
FAN
SPEEDS

ACTIVATES
TIMER

LIGHT

Battery Size: AA

WARNING

:  Do  Not  Mix  Old  And  New  Batteries.  Do  Not  Mix  Alkaline,  Standard  (Carbon-Zinc),  Or 

Rechargeable (Nickel-Cadmium) Batteries.

Summary of Contents for FAS255P2A - Heavy Duty Room Air Conditioner













Reviews: