5
Air Conditioner Features
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel and remote
as shown below and all its functions. Then follow the symbol for the functions you
desire. The unit can be controlled by the touch pad alone or with the remote.
Using Air Conditioner
To reduce the risk of fire, electric shock, or injury to persons, read
the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
To begin operating the air conditioner or heater, follow these steps:
1. Plug in the air conditioner. (To prevent electrical hazards, do not use an extension
cord or an adapter plug.)
2. Press “On/Off” button to turn unit on.
3. Press “COOL” Mode for air conditioning, or press “HEAT” Mode for heater.
4. Press “TEMP/TIME” down
V
or up ^ to the desired set temperature.
Review the “Air Conditioner Features” section for other settings.
DISPLAYS
TEMPERATURE/TIME
TURNS UNIT
ON OR OFF
TIMER
RAISES
TEMPERATURE
OR TIME
SELECT FAN SPEEDS
LOWERS
TEMPERATURE
OR TIME
SETS MODE
ON/OFF
REMOTE CONTROL
SLIDE BATTERY COVER OF REMOVE THE TAB
NOTE:
or the temperature is changed to a lower
setting then back to a higher setting the
compressor will shut off. Wait 3 minutes
before the compressor will restart, this
allows for the pressure inside the
compressor to equalize..Failure to wait 3
minutes may cause inefficient operation
when adjusting the temperature the fan
will continue to run.
If the air conditioner is turned off
