Wall Sleeve Brands:
Rear Louvers
60
°
11"
60
°
Top View
#4 General Electric/Hotpoint 16
7
⁄
8
"
Deep
1. Redirect the louvers at the back of the wall sleeve as shown in the
illustration. The use of pliers is recommended.
2. Cut (2) 17
"
Tapered Spacer Blocks to 13” and install as shown in the
illustration with the tapered end
1
⁄
2
"
from the back of the sleeve.
3. Cut (1) 1
1
⁄
2
"
x 3/8
"
x 26
1
⁄
2
"
long seals to 25
"
long attach as shown.
Attach (2) 1
1
⁄
2
"
x 3/8
"
x 14
"
long seals as shown in the illustration.
4. Attach 1
"
x 3/4
"
x 14
"
long seal to the louvered panel as shown in the
illustration.
6. Install the 1
"
x 1
1
⁄
2
"
x 84
"
long stuffer seal between the wall sleeve and the unit.
A flat bladed screwdriver or putty knife is recommended.
5. Install the new unit into the wall sleeve.
Attach the ground wire to the unit as shown.
7. Assemble and install the Trim Frame.
(see Trim Frame)
5
Cut Here
3/4"
17"
13"
1"
Protection Paper Backing
Tapered Spacer Block
6
6
2
4
3
3
3
5
←
10
1
⁄
2
"‹
→
←
6
1
⁄
2
"‹
→
←
6
1
⁄
2
"‹
→
10
1
⁄
2
”
