background image

3

Read all instructions before using this appliance.

Do not attempt to install or operate your appliance until you

have read the safety precautions in this manual. Safety

items throughout this manual are labeled with a WARNING

or CAUTION statement based on the risk type.

WARNING indicates a potentially hazardous

situation which, if not avoided, may result in death

or serious injury.

Save these instructions for future reference.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

• Remove all tape and packaging before using the

range.

 Destroy the carton and plastic bags after

unpacking the range. Never allow children to play with

packaging material.

• Proper installation—Be sure your appliance is

properly installed and grounded by a qualified

technician in accordance with the National Electrical

Code ANSI/NFPA No. 70 latest edition and local

electrical code requirements.

 Install only per

installation instructions provided in the literature package

for this range.

WARNING

      This is the safety alert symbol. It is used to alert you to

potential personal injury hazards. Obey all safety messages

that follow this symbol to avoid possible injury or death.

IMPORTANT

CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in minor

or moderate injury.

CAUTION

IMPORTANT indicates installation, operation,

maintenance or valuable information that is not hazard

related.

Definitions

Important Safety Instructions

• User servicing—Do not repair or replace any part

of the appliance unless specifically recommended in

the manuals.

 All other servicing should be done only by a

qualified technician. This may reduce the risk of personal

injury and damage to the range.

Ask your dealer to recommend a qualified technician and

an authorized repair service. Know how to disconnect the

power to the range at the circuit breaker or fuse box in

case of an emergency.

• Stepping, leaning or sitting on the door or

drawers of a range can result in serious injuries

and also cause damage to the appliance. 

DO NOT

allow children to climb or play around the range. The

weight of a child on an open oven door may cause the

range to tip, resulting in serious burns or other injury.

•  DO NOT LEAVE CHILDREN ALONE — to avoid injuries

or burns children should not be left alone or

unattended in the area where the range is in use.

They should never be allowed to sit or stand on any part

of the range including the storage drawer, lower broiler

drawer, lower oven or warmer drawer.

WARNING

To check if the anti-tip bracket is installed properly, use

both arms and grasp the rear edge of range back.

Carefully attempt to tilt range forward. When properly

installed, the range should not tilt forward.
Refer to the anti-tip bracket 

installation instructions

supplied with your range for proper installation.

• Ensure the anti-tip device is re-engaged when

the range is moved to floor or wall.

• Do not operate the range without the anti-tip

device in place and engaged.

• Failure to follow these instructions can result in

death or serious burns to children and adults.

Tip Over Hazard

• A child or adult can tip the

range and be killed.

• Verify the anti-tip device has

been installed to floor or wall.

Range

leveling leg

Anti-Tip

bracket

Summary of Contents for Electric Ranges

































Reviews: