Frigidaire EFIC245-SS, Use & Care Manual

Page: 6 / 26

This portable ice maker uses a fully automatic control system, with an advanced
microcomputer for easy and convenient ice making. Making ice is simple and
fast. Just add water, plug into an outlet, and press the ON button. You can select
one of the two ice cube sizes with the touch of a button. When first turning on
the unit or during icemaking cycles, the compressor will stay idle for 3 minutes,
while energizing.
There are warning indicators that alert you to fill water when the reservoir is
empty and to remove ice when the storage basket is full. The ice maker also
has built-in safeguards that can limit accidental damage, automatically shutting
down the system when necessary.
The incline angle of the ice maker cabinet should not exceed 45°C during
transportation or use. Do not turn the ice maker upside down. Doing so could
cause the compressor or refrigerating system to operate incorrectly. When the
ice maker is moved or transported, please allow time for the fluids in the
compressor to settle. Before using the ice maker for the first time, please wait 2
hours after the unit has been leveled and positioned in its proper place.
Please ensure the ice maker is level and on a stable table or platform to avoid
malfunction.
The machine must be placed on a dry and level surface with sufficient
ventilation, far from heat sources such as ovens, heaters and corrosive gases.
Leave an 8-inch clearance on all sides of the ice maker for proper ventilation.
Do not fill the water reservoir with hot water. This may damage the ice maker.
It is best to fill the water reservoir with water of room temperature or lower.
1.
2.
3.
4.
Please read carefully.
6
BEFORE FIRST USE