28
Remove the plug from the
socket before performing
this operation, taking care
to not touch the condenser
and compressor, as they
may be hot.
Never clean your refrigerator with
cleaning agents such as alcohol,
kerosene, gasoline, bleach, solvents,
acids, vinegar, abrasive or other
chemicals not recommended in this
manual.
Do not throw water directly inside or
outside the refrigerator.
Inside cleaning
Before starting to clean the refrigerator,
remember that damp objects can easily
adhere to extremely cold surfaces, for
example, the inner surface of freezer. Do
not touch the cold surfaces with wat hands,
cloths or sponges.
To clean the innner parts of the refrigerator,
use only a cloth moistened with a solution
of water and sodium bicarbonate (dilute 1
tablespoon of bicarbonate for 1 liter of water).
Never use metal scrapers, sharp objects,
brushes, abrasive or alkaline cleaners to
cleaning of plastic surfaces inside your
refrigerator.
Outside cleaning
To easily clean the outside of your refrigerator,
use a solution of warm water with mild soap
and then dry it thoroughly with a clean cloth.
Every six months clean the condenser on
the back of the refrigerator using a vacuum
cleaner or a feather duster.
Accumulated dust avoids the correct
operation of the condenser, affecting the
performance of the refrigerator and leading
to a higher energy consumption.
Cleaning the door seals
Clean the seals carefully with a soft, damp
cloth. Rubbers are not removable. After
cleaning, dry them being careful not to
damage them.
Water collector
Your refrigerator has a water
collector located on its back.
Its function is to eliminate
water from the automatic
defrost by evaporation. The cleaning of the
collector is not necessary for the operation
of the refrigerator. Avoid contact with this
refrigerator area.
LED lamp replacement
To replace the lamp of your refrigerator,
unplug the plug and proceed as follows:
Refrigerator compartment:
1.
Open the lamp cover by turning the tool to
unlock it.
2.
Disconnect (turning counterclockwise) the
lamp from its support.
3.
Replace the burnt lamp with another of the
same size, maximum voltage and potency
of 1,6W.
Cleaning and Maintenance
Summary of Contents for DF35A
Page 34: ...34 Notes ...
Page 35: ...35 Notes ...
Page 36: ...www electrolux com A05170301 A G0010259 003 Jan 16 ...