E
IMPORTANT SAfETY INSTRUCTIONS
GRoUNdING INSTRUCTIoNS
This appliance must be grounded. This microwave oven is equipped with a cord having a grounding
wire with a grounding plug. It must be plugged into a wall receptacle that is properly installed and
grounded in accordance with the National Electrical Code and local codes and ordinances. In the
event of an electrical short circuit, grounding reduces risk of electric shock by providing an escape
wire for the electric current.
Improper use of the grounding plug can result in a risk of electric shock.
Electrical Requirements
Check Installation Instructions for proper location for the power supply.
The electrical requirements are a 120 volt 60 Hz, AC only, 15 amp. or more protected electrical
supply. It is recommended that a separate circuit serving only the microwave oven be provided.
The microwave oven is equipped with a 3-prong grounding plug. It must be plugged into a wall
receptacle that is properly installed and grounded. DO NOT UNDER ANY CIRCUMSTANCES CUT
OR REMOVE THE GROUNDING PIN FROM THE PLUG.
Extension Cord
If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-blade
grounding plug and a 3-slot receptacle that will accept the plug on the microwave oven. The
marked rating of the extension cord should be AC 115-120 volt, 15 amp. or more.
Be careful not to drape the cord over the countertop or table where it can be pulled on by children
or tripped over accidentally.
NoTES:
1. If you have any questions about the grounding or electrical instructions, consult a qualified
electrician or service person.
2. Neither Electrolux nor the dealer can accept any liability for damage to the microwave oven or personal injury resulting from failure to
observe the correct electrical connection procedures.
Radio or TV Interference
Should there be any interference caused by the microwave oven to your radio or TV, check that the microwave oven is on a different
electrical circuit, relocate the radio or TV as far away from the microwave oven as feasible or check position and signal of receiving antenna.
