background image

12

PROBLEM

CAUSE

CORRECTION

Longer sound 

levels when 

compressor 

comes on.

•  Appliance operates at higher 

pressures during the start of 

the ON cycle.

•  This is normal. Sound will level off or 

disappear as appliance continues to run.

Popping or 

cracking sound 

when compres-

sor comes on.

•  Metal parts undergo 

expansion and contraction, as 

in hot water pipes.

•  This is normal. Sound will level off or 

disappear as appliance continues to run.

Bubbling 

or gurgling 

sound, like 

water boiling.

•  Refrigerant (used to cool 

the appliance) is circulating 

throughout the system.

•  This is normal.

Vibrating or  

rattling noise.

•  Appliance is not level. It rocks 

on the floor when it is 

 

moved slightly.

•  Floor is uneven or weak. 

 

•  Appliance is touching  

the wall.

•  Level the unit. Refer to ”Leveling” in the 

First 

Steps

 Section.  

• 

Ensure floor can adequately support appliance. 

Level the appliance by putting wood or metal 

shims under part of the freezer.

•  Re-level the appliance or move appliance 

slightly. Refer to “Leveling” in the 

First 

Steps

 Section.

Alarm is 

sounding 

from the con-

trol panel

•  Look on the control panel to 

determine which indicator 

light is on (High Temp, Power 

Fail, or Door Ajar).

•  Press the “set” button to acknowledge the 

alarm or close the door if the door ajar 

indicator is shown.

WATER/MOISTURE/FROST INSIDE APPLIANCE
Moisture 

forms on in-

side appliance 

walls.

•  Weather is hot and humid.
•  Door is opened too often or  

too long.

•  This is normal.
•  Open door less often.

ODOR IN APPLIANCE
Odor in appli-

ance.

•  Interior needs to be cleaned. 

•  Foods with strong odors are 

in the appliance.

•  Clean interior with sponge, warm water, and 

baking soda.

•  Cover the food tightly.

LIGHTING PROBLEMS
Light bulb is 

not on.

•  No electric current is reaching 

the appliance

•  Control is in Sabath mode (Sb 

is displayed on control)

•  See “APPLIANCE DOES NOT RUN”. 

•  Depress TEMP MODE key and CONTROL LOCK 

key for 3 seconds.

BEFORE YOU CALL

Summary of Contents for Cool Connect FGVH2177T














Reviews: