manualshive.com logo in svg

Frigidaire CMEF212ES, Use & Care Manual, Page: 15 / 34

Share
Download
Frigidaire CMEF212ES Use & Care Manual Download Page 15

 15

Surface Cooking

 ( continued)

Ceramic Glass Cooktop

 (some models) (continued)

Setting Warm Zone Controls 

(some models)

To Operate the warm zone

Your appliance is equipped with a warm zone. The purpose of the warm zone is to keep hot cooked foods at serving temperature.
Always start with hot food. It is not recommended to heat cold food on the warm zone.

Use the warm zone to keep cooked foods hot such as: vegetables, gravies, casseroles, soups, stews, breads, pastries and
oven-safe dinner

All food placed on the warm zone should be covered with a lid or aluminum foil to maintain quality. For best results, when warming
pastries or breads, the cover should have an opening to allow moisture to escape. 

Do not use plastic warp to cover food.

Plastic may melt onto the surface and be very difficult to clean.

Use only dishware, utensils and cookware recommended for oven and cooktop use on the warm zone.

  Unlike the surface elements, the warm zone will not glow red when it is hot. Always use potholders or oven mitts

when removing food from the warm zone as cookware and plates will not be hot.

Indicator Lights

The 

Hot Surface indicator light 

is located above or below the

warm zone control. It turns on when the control is set and will
continue to glow until the glass cooktop has cooled down to
moderate level.

To Set the Warm Zone Control

1. To set the control, push in and turn the knob. The temperatures

are approximate, and are designated by MAX, MED and MIN.
However, the control can be set at any position between HI and
MIN for different levels of heating.

2. When done, turn the control to OFF position. The warm zone

will remain warm until the 

hot surface indicator light

 goes

off.

Temperature Selection

Refer to the chart for recommended heating levels. If a particular food is not listed, start with the medium level, and adjust as
needed. Most food can be kept at serving temperatures by using the medium level.

OFF

MED

LO

HI

WARM & SERVE

ZONE

Appearence and

graphics may be

differents

Warm Zone

Appearence and graphics

may be differents

Food Item

Heating
Level

Breads/Pastries

MIN

Casseroles

MIN

Dinner Plate with Food

MIN

Eggs

MIN

Gravies

MIN

Meats

MED

Food Item

Heating
Level

Sauces

MED

Soups (cream)

MED

Stews

MED

Vegetables

MED

Fried Foods

MAX

Hot Beverages

MAX

Soups (liquid)

MAX

Warm Zone Recommended Food Settings Chart

Summary of Contents for CMEF212ES



































Reviews:

No comments