Page 34
1. Disconnect the power supply cord.
2. Open the door and block it open.
the oven cavity front face plate.
the terminal hole of the oven lamp socket with the small
flat type screw driver.
TURNTABLE MOTOR
the oven cavity.
HOOD LAMP SOCKET
9.
Disconnect the wire leads from the lamp socket
.
10.
Remove the two lamp cover.and remove the two (2)
screws holding the lamp socket to the base plate.
Remove the lamps
.
11. Now, the lamp socket is free.
1. Disconnect the power supply cord, remove the
hood
exhaust louver
. (Refer to procedure
of "REMOVAL OF
HOOD EXHAUST LOUVER
N
".).
to
the oven cavity
front flange
,
and remove the air
protector R.
OVEN LAMP AND LAMP SOCKET REMOVAL
2. Open the door and block it open.
3. To discharge the high voltage capacitor, wait for 60
seconds.
4. Remove t
wo
(
2
) screws holding the hood exhaust louver
to oven cavity front face plate.
5. Remove the hood exhaust louver from the oven by
pushing the right and left tabs of the hood exhaust louver.
(Refer to procedure of "HOOD EXHAUST LOUVER
REMOVAL")
6. Remove one (1) screw holding the control panel to the
oven cavity front face plate.
CONTROL PANEL ASSEMBLY, CONTROL UNIT AND KEY UNIT REMOVAL
1. Disconnect the power supply cord.
7. Release the control panel from the oven cavity front face
plate by lifting it up.
8. Disconnect the wire leads from the relays RY1 and
RY2.
9. Disconnect the connectors CN-A, CN-C and CN-E from
the control unit.
10. Remove the control panel assembly from the oven.
11.Now, the control panel assembly is free.
12.Disconnect the connector CN-G from the control unit.
13.Remove two (2) screws holding the power unit to the key
4. Open the
front
base cover
from cavity front face plate
.
3. Remove the three (3) screws holding the base cover to
5.
Now,the base plate is hanging on the rear cavity .
6
. Disconnect the wire leads from the turntable motor.
TURNTABLE MOTOR AND FOOD LAMP SOCKETS REMOVAL
7.
Remove one (1) screw holding turntable motor to
8.
Now the turntable motor is free.
2. Remove the t
wo
(
2
) screws holding the
air protector R
3. Disconnect the wire leads from lamp socket.
5
.
Turn
the oven lamp off from the lamp socket.
7. Now, the oven lamp socket is free.
4
. Turn the lamp socket and release it from the
air
duct.
6
. Now, the oven lamp is free.
FMV157GC
