3
CO
2
CANISTER SAFE HANDLING
•
CO
2
canisters must be handled with extreme care. They
contain potentially hazardous high pressure compressed
gas.
•
ALWAYS
connect CO
2
gas canisters to a pressure
regulator.
•
NEVER
drop or throw the CO
2
canister.
•
NEVER
connect gas canister directly to keg.
•
ALWAYS
keep CO
2
canisters in a cool place (70º or
less) and away from heat.
•
In case of CO
2
leakage, ventilate and evacuate the area
immediately.
•
ALWAYS
keep canister secured in an upright position.
•
Check the Department of Transportation (D.O.T.) test
date on the canister neck and do not use if older than 5
years.
•
Return outdated canister to your gas supplier for one that
is within the time window.
•
If voltage varies by 10% or more, performance of your
beverage cooler may be affected. Operating beverage
cooler with insufficient power can damage the
compressor.
•
To prevent the beverage cooler from being turned off
accidentally, do not plug unit into an outlet controlled by
a wall switch or pull cord. It is recommended that a
separate circuit serving only your beverage cooler be
provided.
•
Do not pinch, knot, or bend the cord in any manner.
•
DO NOT
use this appliance outside. It is designed for
indoor use only.
•
NEVER
unplug the beverage cooler by pulling on the
cord. Always grip the plug firmly, and pull straight out
from the receptacle.
•
To avoid electrical shock, unplug the beverage cooler
before cleaning.
N
th
OTE:
Turning the temperature control to “OFF” turns off
e compressor, but does not disconnect the power to other
lectrical components.
e
DRIP TRAY AND MOUNTING HARDWARE BOX
(1)
Drip Tray 1 piece
(
(
2)
Drip Tray Cover 1 piece
3)
Drip Tray Bracket 1 piece
(4)
CO
2
Canister Bracket 1 piece
(5)
Mounting
Screw
s
6
pieces
(
(
6)
4”
Long
Carriage
Bolt
1
piece
7)
Wing Nut 1 piece
(8)
Hose
Routing
Clips
2
pieces
(1) DRIP TRAY
(2) DRIP TRAY
COVER
(3) DRIP TRAY
BRACKET
(4) CO
2
CANISTER
BRACKET
(6) 4” LONG
CARRIAGE BOLT
(5) MOUNTING
SCREW
(7) WING NUT
(8) HOSE
ROUTING CLIP
This Use and Care Manual provides specific assembly,
perating and maintenance instructions for your model. Use
he beverage cooler only as instructed in this Use and Care
anual.
Before starting the beverage cooler, follow these
mportant first steps.
o
t
M
i
PARTS AND ACCESSORIES
Your beverage cooler comes with a box that contains all the
arts and accessories needed for your beverage cooler.
heck to make sure that you have received the box
ontaining all of the components listed below. You will need
he following tools to assemble the beverage cooler.
p
C
c
t
PHILLIPS
™
SCREWDRIVER
SOCKET
WRENCH
ADJUSTABLE
WRENCH
PLIERS
