background image

10

Care & Cleaning

Ceramic Glass Cooktop Cleaning & Maintenance

Consistent and proper cleaning is essential to maintaining your Ceramic glass cooktop

Prior to using your cooktop for the first time, apply the recommended CERAMA BRYTE® Cleaning Creme to the ceramic
surface. Clean and buff with a non abrasive cloth or pad. This will make cleaning easier when soiled from cooking. The special
cooktop cleaning cream leaves a protective finish on the glass to help prevent scratches and abrasions.

Sliding aluminum or copper clad bottom pans on the cooktop can cause metal markings
on the cooktop surface. These marks should be removed 

immediately

 after the cooktop

has cooled using the cooktop cleaning cream. Metal marks can become permanent if not
removed prior to future use.

Cookware (cast iron, metal, ceramic or glass) with rough bottoms can mark or scratch the
cooktop surface. 

Do not slide anything metal or glass

 across the cooktop. 

Do not

 use

your cooktop as a cutting board or work surface in the kitchen.  

Do not

 cook foods directly

on the cooktop surface without a pan. 

Do not

 drop heavy or hard objects on the glass

cooktop, or they may crack it.

 

Before cleaning the cooktop, be sure the controls are turned to 

OFF

 and the cooktop is COOL.

 DO NOT

 use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health, and can

chemically damage the ceramic glass surface.

Cleaning Recommendations for the Ceramic Glass Cooktop

For light to moderate soil:

Apply a few drops of CERAMA BRYTE® Cleaning Creme directly to the cooktop. Use a paper towel or a Multi-
Purpose No Scratch Scrub Sponge to clean the entire cooktop surface. Make sure the cooktop is cleaned
thoroughly, leaving no residue. Do not use the sponge you use to clean the cooktop for any other purpose.

For heavy,  burned on soil:

First, clean the surface as described above. Then, if soils remain, carefully scrape soils with a metal razor blade
scraper, holding scraper at a 30 degree angle to the surface. Remove loosened soils with
cooktop cleaning cream and buff surface clean.

 Damage to the ceramic glass cooktop may occur if you use any scrub pad

other than a Multi-Purpose No Scratch Scrub Sponge.

Plastic or foods with a high sugar content:

These types of soils need be removed immediately if spilled or melted onto the ceramic
cooktop surface. Permanent damage (such as pitting of the cooktop surface) may occur if
not removed 

immediately

.  After turning the surface elements OFF, use a razor blade

scraper or a metal spatula with a mitt and scrape the soil from the hot surface (as illustrated).
Allow the cooktop to cool, and use the same method for heavy or burned on soils.

Do not use the following on the ceramic glass cooktop:

• Do not use abrasive cleaners and scouring pads, such as metal and some nylon

pads. They may scratch the cooktop, making it more difficult to clean.

• Do not use harsh cleaners, such as chlorine bleach, ammonia or oven cleaners, as

they may etch or discolor the cooktop.

• Do not use dirty sponges, cloths or paper towels, as they can leave soil or lint on the

cooktop  which can burn and cause discoloration.

Special Caution for Aluminum Foil and Aluminum Cooking Utensils

Aluminum foil:

Use of aluminum foil will damage the cooktop. Do not use under any

circumstances.

Aluminum utensils: Since

 the melting point of aluminum is much lower than that of other

metals, care must be taken when aluminum pots or pans are used. Pans that boil dry may
permanently damage cooktop by breaking, fusing to, or marking it.

Summary of Contents for 318200633













Reviews: