242288401
ICE MAKER INFORMATION
Test Cycling
Press the momentary contact on the ON/OFF switch for approximately 15 seconds. Ice maker
will continue to complete the cycle.
Water Fill Volume
The water fill can be adjusted without removing the ice maker cover. To adjust the fill size,
remove the small round plug next to the On/Off Switch. Insert a #2 Phillips screwdriver into
the hole about an inch or until it engages the Water Fill Adjustment Screw. Turn the screw
clockwise to reduce the fill size; turn the screw counterclockwise to increase the fill size. One
turn equals approx 20cc (0.68 oz). The correct fill is 85 to 95cc (2.75 to 3.25 oz). When a
water valve is replaced, check the fill volume.
TU
R
N
Mounting
Plate
Screws
Mounting
Plate
Screw
Motor
Gear
Timing
Gear
Water Fill
Adjustment
Ice Maker
ON/OFF
Switch
ICE MAKER SPECIFICATIONS
Electrical
115 vac (127 vac max)
Thermostat
Opens at 48° F ( 9° C), Closes at 9° F ( -13° C)
Heater Wattage
112 watts
ICE MAKER CONNECTOR PLUG CONNECTIONS
Wire Number
Wire Color
Connects to:
1
Green/Yellow
Ground
2
Yellow
Water Valve
3
Black
Line
4
Light Blue
Neutral
