Frigidaire 242134903 Use & Care Manual Download

Page: 29 / 35

CHANGING THE FILTER

Ordering replacement filters

Order new filters by calling 877-808-4195, online

at www.frigidaire.com/store, or through the dealer

where you bought your refrigerator. You may want to

consider ordering extra filters when you first install your

refrigerator.

Air Filter Replacement cartridge, part #PAULTRA

Air filter

(select models)

The air filter is located under the utility bin.

Replacing your PureAdvantage

air filter

To ensure optimal filtering of refrigerator odors, you

should change the air filter every six (6) months (the

filter status light on the Touch Panel prompts you to

replace the filter after six (6) months).

Open the air filter door.

Remove the old filter and discard it.

Unpack the new filter and slide it into the housing.

The open face of the filter should be installed

facing downward.

To close the air filter door, push the top and bottom

to lock the door closed.

5 Press and hold the Air Filter Reset button on

the control panel for three (3)seconds. When the

display changes from “Replace” to “Good,” the

status has been reset.

6 The Air Filter Reset will turn itself off after a few

seconds.

Summary of Contents for 242134903




































Search results

Summary of Contents for 242134903

Reviews:

Related manuals for 242134903

Brands by name

Popular brands

Frigidaire 242134903, Use & Care Manual

Search results

Summary of Contents for 242134903

Reviews:

Related manuals for 242134903

Brands by name

Popular brands