2
1. Ice Maker
2. Ice Container
3. Screws - Qty 2
5. Leveling Bracket
(mounted on Ice maker)
4. Leveling Bracket Screw
(used to mount leveling
bracket to Ice maker)
Tools Required:
Plastic Putty Knife
•
¼ inch Socket Wrench or Nut Driver
•
Adjustable Wrench
•
USE ThIS PAgE TO IDENTIfy PARTS
ICE MAKER INSTALLATION INSTRUCTIONS
NOTE
There are two plugs on the left freezer wall that must be removed. These holes will be used to mount the Ice
Maker (1).
1. Unplug refrigerator from electrical outlet.
2. Remove ice tray rack from freezer (some models).
3. Remove spacer. Remove freezer shelf (some models) by pushing shelf to left until right side of shelf
comes free from holes. Then slowly lift up and pull shelf free from holes on right side.
4. Use a plastic putty knife to remove plugs and cover from inside freezer compartment. Use a ¼ inch socket
wrench or nut driver to remove harness connector cover. (See Figure 1.)
5. Start two, long, Ice Maker mounting screws (3) into freezer wall where plugs were removed in Step 4. Turn
each screw clockwise five turns. (See Figure 2.)
(3) Ice Maker
Mounting Screws
figure 2
Harness Connector Cover
Plastic Plugs
figure 1
Screw
