Frigidaire 137227300 Operating Instructions Manual Download Page 2

Energy Saving Tips

• Keep the lint screen clean and exhaust the dryer

correctly.

• Sort laundry properly and select proper temperature

and cycle settings. Choose an automatic dry cycle
whenever possible for accurate drying time.

• Dry only full loads. Single items and small loads

usually take longer to dry.

• Avoid overloading, adding wet items to a partially dry

load, and overdrying.

• Dry one load after another to take advantage of a

warm dryer.

• Opening the door needlessly causes warm air to

escape, which prolongs drying time.

• If possible, use the dryer on low humidity days.

• Install the dryer in an area where the room temperature

is at least 45°F (7°C).

P/N 137227300 (0905)

MORE DRY

COOL

DOWN

20

30

40

50

60

70

AUTOMATIC

PERM PRESS

TIMED DRY

START

TEMPERATURE

KNITS/DELICATES

LOW HEAT

AIR FLUFF

NO HEAT

REGULAR

HIGH HEAT

PERM PRESS

MEDIUM HEAT

COOL

DOWN

AUTOMATIC

REGULAR

PRESS SAVER /

FABRIC SENTRY

LESS DRY

START

ON

Cycle Selection

Turn cycle selector clockwise to desired cycle and
setting.

Each cycle ends with a cool down period. The heat
automatically turns off and the load continues to
tumble for 5-10 minutes. This reduces wrinkling and
makes items easier to handle during unloading.

Drying time varies depending on size and dampness of
load, weight and fabric type. Room temperature and
humidity, type of installation and electrical voltage or
gas pressure can also affect drying time.

Automatic Perm Press/Delicates Cycle

This cycle is best for permanent press, knit and delicate
items. Drying time is determined automatically at the
temperature selection of your choice.

• Medium heat is suggested for permanent press

items.

• Low heat is suggested for knit and delicate items.

If the dried load cannot be removed promptly, the cycle
selector will advance to the Press Saver/Fabric Sentry

setting. Unheated tumbling continues during Press
Saver/Fabric Sentry for approximately 30 minutes to
help reduce wrinkling.

The cycle signal will sound briefly every 5 minutes as a
reminder to remove the load.

Automatic Regular Cycle

This cycle is best for cotton items that can be tumble
dried.

Drying time is determined automatically at the
temperature selection of your choice. This cycle is best
for items of similar fabric, weight and construction.

• For items requiring more drying time, set cycle

selector on MORE DRY.

• For items requiring less drying time, set cycle selector

on LESS DRY.

Timed Dry Cycle

This cycle provides up to 70 minutes of drying time at
the temperature selection of your choice.

Summary of Contents for 137227300









Reviews: