Frigidaire 137135000B, Use & Care Manual

Page: 10 / 18

10
OPERATING INSTRUCTIONS
Cycle Settings, continued
Dryness Level (Auto Dry)
To change the preset level, press the Dryness button to
scroll to the degree of dryness desired.
To protect your fabrics, not all dryness levels are available
with every cycle. If a Dryness level is not appropriate for
the cycle, it cannot be selected.
The Dryness level selected for the cycle will be remembered
and recalled each time that cycle is selected in the future.
To return to factory settings, press the Start/Pause and
Select buttons at the same time and hold until the signal
sounds.
Í
NOTE
To change the Dryness level after the cycle starts, press
Start/Pause, adjust the setting and press Start/Pause to
resume the cycle.
Select the Normal dryness level for most Auto Dry cycles.
Occasionally a load may seem too damp or over-dried at
the end of the cycle. To increase drying time for similar
loads in the future, select More Dry. For loads requiring
less drying time, select Less Dry.
Select Damp Dry for items you wish to partially dry
before hanging or ironing.
Options
To select an option, press Options until the indicator for
the desired option fl ashes, then press Select. If an option
is not available for a cycle, the indicator will not light.
Follow the same steps to delete an option.
Shrink Guard
Select Shrink Guard to lower the initial drying
temperature to protect fabrics from overdrying.
Extended Tumble
Select Extended Tumble if the dried load might not
be removed promptly at the end of the cycle. The dry
load will continue tumbling without heat to help reduce
wrinkling. When the Signal is selected, a beep will be
heard periodically. The load may be removed any time
during Extended Tumble.
Signal Volume
A signal will sound at the end of the cycle (and
periodically during Extended Tumble) if this option is
selected. The signal has an adjustable volume level or
can be turned off.
Í
NOTE
To change the Options after the cycle starts, press
Start/Pause, adjust the setting and press Start/Pause to
resume the cycle.
This manual covers many models and not all cycles, options, or features listed are available
on every model. Console shown above for reference only. Your model may differ.