friendlyway D-Sing 12 Operation Manual Download Page 7

3. Mounting and requirements for the surrounding area  

 

3.1. Requirements for the surrounding area 

 
Your friendlyway d-sign 12" was specially developed for use in enclosed areas and has specific requirements 
for the surrounding area: 
• Permissible ambient temperature:  15 - 30°C 
• No sources of warmth or heat (direct sunlight, heater) in the immediate vicinity, no direct effects of heat. 
• No high relative humidity 

 

 

The machine must only be operated under the environmental conditions listed above.  
Please take this into consideration when selecting a place to set up the device. 

 
 

3.2. Mounting 

 

The d-sign 12’’ in its basic model is mounted in a wall. For mounting a corresponding wall break should be 
prepared (312x248 mm). 
 

Instructions on mounting into the wall: 

1. Remove the front panel by using a slotted screwdriver as a lever. 
2. Place the device in the wall and tighten the 4 hitches with a Phillips screwdriver until the housing is fixed. 
3. Set the front panel in the housing and press on the front panel with a flat hand until the panel is caught.

 

 

Instructions on disassembling from the wall: 

1. Remove the front panel by using a slotted screwdriver as a lever. 
2. Loose the hitches with a Phillips screwdriver until they swivel into the housing. 
3. Remove the housing from the wall. 
 
Optionally, the d-sign 12" can be also mounted on a stand. 

 

 

7

Summary of Contents for D-Sing 12















Reviews: